CS 409 Y Wide belts with cloth backing for Stainless steel

Applications
Stainless steel
Properties
Bonding agent Resin
Grain Zirconia alumina
Coating Close
Backing Y-polyester

Klingspor abrasive belt CS 409 Y – the perfect wide belt for processing stainless steel

The abrasive belt CS 409 Y by Klingspor is distinguished by its aggressive abrasive performance, which is the product of its self-sharpening grain and an additional multibond. This type of structure keeps annealing colours from forming on workpieces made of high-alloy steel, allowing for a result of impeccable quality. The multibond also reduces clogging when the belt is used for grinding soft, smearing materials. This wide belt is therefore ideal for grinding

  • stainless steel,
  • aluminium
  • and aluminium alloys.

Closely coated zirconia alumina on a tear-resistant backing

The self-sharpening zirconia alumina of Klingspor’s CS 409 Y provides for a high removal rate and a long service life. This wedge-shaped grain is both hard and exceedingly tough. Since made synthetically, it boasts a uniform crystalline structure. The zirconia alumina of the wide belt CS 409 Y is applied with a close coating, ensuring that the backing surface is almost completely covered with grain. The company uses heavy and tear-resistant polyester as the backing for the zirconia grit. This material is particularly well suited for stock removal grinding and will stand up to even the highest loads during metal processing.

Providing a cooling effect – the multibond

Cool grinding is ensured by the multibond used for this product. This type of coating is added at the of the production process by applying an additional coat to the abrasive belt. It is applied to the size coat and lowers the temperature at the grain tips, thus keeping the material being ground from sticking to the belt. Multibond gives a boost to both the removal rate and the service life of an abrasive belt as it minimises friction heat and keeps the abrasive belt from clogging up prematurely. When the product is used for grinding stainless steel, the coating prevents heat-induced discolouration, which is also referred to as annealing colours. These annealing colours can be prevented completely by a multibond. This is why multibond coatings are widely used for belts engineered to process high-alloy steels - in addition to being a popular choice for abrasives used on stainless steel. The coating reduces the tendency of aluminium, copper, brass or other soft, smearing metals to cling to the belt while being ground, thereby preventing premature clogging.

Available grits
16 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000 2500 3000
Reset filters
Width/mm Length/mm Grit Belt joint Coated abrasives Type
930
Width
1.900
Length
80
Grit
F4G butt joint
Belt joint
CS 409 Y
Coated abrasives Type
1.120
Width
2.150
Length
60
Grit
F4G butt joint
Belt joint
CS 409 Y
Coated abrasives Type
1.120
Width
2.150
Length
80
Grit
F4G butt joint
Belt joint
CS 409 Y
Coated abrasives Type
1.380
Width
2.620
Length
40
Grit
F4G butt joint
Belt joint
CS 409 Y
Coated abrasives Type
1.180
Width
2.200
Length
60
Grit
F4G butt joint
Belt joint
CS 409 Y
Coated abrasives Type
1.380
Width
2.620
Length
60
Grit
F4G butt joint
Belt joint
CS 409 Y
Coated abrasives Type
1.180
Width
2.200
Length
80
Grit
F4G butt joint
Belt joint
CS 409 Y
Coated abrasives Type
1.110
Width
1.900
Length
120
Grit
F4G butt joint
Belt joint
CS 409 Y
Coated abrasives Type
1.180
Width
2.200
Length
120
Grit
F4G butt joint
Belt joint
CS 409 Y
Coated abrasives Type
1.120
Width
2.150
Length
120
Grit
F4G butt joint
Belt joint
CS 409 Y
Coated abrasives Type
1.380
Width
1.900
Length
120
Grit
F4G butt joint
Belt joint
CS 409 Y
Coated abrasives Type
1.380
Width
1.900
Length
80
Grit
F4G butt joint
Belt joint
CS 409 Y
Coated abrasives Type

All prices exclude statutory value-added tax and are applicable to commercial customers only.