CS 912 Y ACT Belts with cloth backing for Stainless steel, Steel

Applications
Stainless steel
Steel
Properties
Bonding agent Resin
Grain Ceramic Al. oxide
Coating Close
Backing Y-polyester

Abrasive belt CS 912 Y ACT – for aggressive abrasive performance and outstanding efficiency

The abrasive belt CS 912 Y ACT by Klingspor delivers ultimate efficiency and stands out primarily with its high performance. This high-performance abrasive belt offers a host of advantages including

  • an exceptionally long service life,
  • a highly tear-resistant backing,
  • suitability to stand up to even the highest loads and
  • excellent grain adhesion.

This abrasive belt is an excellent choice for a variety of applications.

Abrasive belt CS 912 Y ACT – with aggressive abrasive performance and a long service life

The abrasive belt CS 912 Y ACT is a special product that comes with a cloth backing made of Y-polyester. This backing proves to be exceptionally tear-resistant and manages to impress with the consistently high quality of the ground surface and its long service life. The abrasive material used is closely coated red ceramic with a fully synthetic bond. This hard, exceptionally tough, microcrystalline and self-sharpening abrasive material is guaranteed to deliver an aggressive abrasive performance. The sharp grain points ensure that the close coating will result in a high stock removal rate. This high-performance abrasive belt has been designed specifically for the high loads that are typical of metalworking applications. The acronym ACT stands for Advanced Coating Technology. This technology guarantees exceptional grain adhesion.

Abrasive belt CS 912 Y ACT – the high-performance abrasive belt for various applications

The high-performance abrasive belt CS 912 Y ACT is an excellent choice for a large number of metalworking applications. Klingspor developed this premium product for applications in engine construction, container manufacturing, in the tool industry and for turbine manufacturing in aircraft construction. It can be used for rough as well as intermediate and finish sanding, for deburring, for work on weld seams and edges and for surface sanding in combination with hard contact rollers. It shows exceptional performance especially when combined with

  • hand tool belt grinders,
  • surface grinding machines
  • wide belt machines and
  • pedestal sanders.

Abrasive belt CS 912 Y ACT – the specialist for metalworking applications

The abrasive belt CS 912 Y ACT by Klingspor is a product specially designed for processing stainless steel and steel. It performs equally well on cast material and high-alloy steels such as titanium and turbine steel.

Available grits
16 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000 2500 3000
Reset filters
Width/mm Length/mm Grit Belt joint Coated abrasives Type
330
Width
2.500
Length
180
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
330
Width
2.500
Length
80
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
330
Width
2.500
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
1.750
Length
80
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
75
Width
2.000
Length
60
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
75
Width
2.000
Length
36
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
75
Width
2.000
Length
40
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
1.600
Length
80
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
75
Width
2.000
Length
80
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
150
Width
2.500
Length
36
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
2.000
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
190
Length
80
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
76
Width
272
Length
60
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
120
Width
2.000
Length
36
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
70
Width
5.000
Length
36
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
1.500
Length
50
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
189
Length
80
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
30
Width
6.750
Length
100
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
75
Width
1.830
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
1.275
Length
36
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
2.000
Length
36
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
60
Width
1.000
Length
36
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
80
Width
2.800
Length
36
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
150
Width
2.250
Length
36
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
150
Width
3.000
Length
36
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
785
Length
40
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
2.000
Length
40
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
100
Width
1.000
Length
40
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
75
Width
2.000
Length
50
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
100
Width
2.000
Length
50
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
2.000
Length
60
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
1.275
Length
60
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
785
Length
60
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
75
Width
2.500
Length
60
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
75
Width
3.500
Length
60
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
100
Width
4.000
Length
60
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
680
Length
80
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
60
Width
1.000
Length
80
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
32
Width
3.500
Length
100
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
75
Width
2.000
Length
100
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
75
Width
2.500
Length
100
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
40
Width
8.500
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
2.400
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
450
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
3.500
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
800
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
60
Width
1.000
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
75
Width
2.000
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
75
Width
1.000
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
100
Width
1.000
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
40
Width
860
Length
180
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
1.500
Length
180
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
1.600
Length
180
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
60
Width
1.000
Length
180
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
75
Width
2.000
Length
180
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
75
Width
1.200
Length
180
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
100
Width
285
Length
80
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
38
Width
315
Length
60
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
38
Width
315
Length
150
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
610
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
65
Width
1.000
Length
36
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
100
Width
950
Length
36
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
100
Width
915
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
200
Width
3.450
Length
80
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
2.000
Length
80
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
150
Width
2.742
Length
60
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
150
Width
6.750
Length
60
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
200
Width
2.500
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
1.600
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
38
Width
3.000
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
100
Width
4.745
Length
80
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
70
Width
5.123
Length
36
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
260
Width
2.500
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
100
Width
9.000
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
100
Width
915
Length
60
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
50
Width
1.500
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
100
Width
9.000
Length
180
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
100
Width
2.000
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
25
Width
620
Length
60
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type
27
Width
762
Length
120
Grit
F4G butt joint
Belt joint
CS 912 Y
Coated abrasives Type

All prices exclude statutory value-added tax and are applicable to commercial customers only.